Particulate emissions are tiny air particles and droplets composed of hundreds of chemical substances. Most of them are formed by emissions from public utilities, industry, and vehicles in the atmosphere. The Environmental Protection Bureau regulates inhalable particulate matter with a diameter of less than 10 microns (PM10 and below).

---

ZTW  particulate & dust collector

A dust removal unit based on ceramic fiber filter tubes is used to achieve industrial dust and particulate matter emission control of PM values, including PM10, PM2.5, and submicron PM1.0 particulate matter emission control.
Purification performance: Dust removal efficiency ≥ 99% (typical particle emission concentration<5mg/Nm3, minimum<1mg/Nm3).
Applicable temperature range: 200-1000 ℃.

The unique design of the particulate matter dust collector based on ceramic fiber filter tubes results in particulate matter being captured on the surface of the filter tube without penetrating deeply into the filter wall. This allows the surface to be completely cleared, and high depth smoke loads require more frequent cleaning of the filter through reverse air pulses to remove accumulated particulate matter on the medium.

---

Thanks to its ultra-high porosity, air to cloth ratio, and ultra small nanoscale pore size, it is possible to achieve 99% of industrial dust and particulate matter, including PM10, PM2.5, and PM1. The ceramic filter tube surface forms a unique adsorbent filter cake, which can simultaneously remove over 95% of acidic components, organic polycyclic aromatic hydrocarbons, and dioxins in flue gas. The typical emission concentration of industrial dust and particulate matter in flue gas treatment projects using ceramic filter tubes is less than 5mg/Nm3, and can even reach<1mg/NM3. Its normal service life exceeds 5 years, and under specific working conditions, it can even reach 8-10 years.

---

Especially for high temperature scenarios between 800-1000 degrees, the efficiency of traditional dust removal processes rapidly decreases, and ceramic fiber dust removal filter tubes are the optimal solution for dust removal in this temperature range. It can be widely applied in fields such as waste incineration and metallurgy.